Advanced Interception Systems. GSM/CDMA/Satellite Intercept
discoverytelecom +353 1 902 6688‬ +44 20 3769 1919 +41 22 501 7127
ˆ 1,14
Your basket
0 $

Special monitoring systems for secret services


TALAN™ 3.0 Telephone & Line Analyzer

  • TALAN-3.0-Telephone-and-Line-Analyzer
  • TALAN-3.0-Telephone-and-Line-Analyzer-VoIP-Analysis
  • TALAN-3.0-Telephone-and-Line-Analyzer-Back-Input-Panel
  • TALAN-3.0-Telephone-and-Line-Analyzer-Resistance-Testing
  • TALAN-3.0-Telephone-and-Line-Analyzer-VoIP-Analysis
  • TALAN-3.0-Telephone-and-Line-Analyzer-RF-Spectrum
  • TALAN-3.0-Telephone-and-Line-Analyzer-Non-Linear-Junction-Detector-NLJD
Main characteristics
SKU 2149
Vendor REI
Category Search of leakage channels
Frequency 100 kHz to 600 MHz
Power source 3.7V, 3400mAh, 12.6Wh
Battery Rechargeable Lithium ion, 4-hour runtime (typical)
Display 3.5” touch screen
Memory 64 MB SDRAM (OS), 64 MB Flash
Dimensions, HWD 25.4 x 32.8 x 6.9 cm
Weight 2.7 kg
Shipment Free Worldwide

Detect Wire Taps and Eavesdropping

The TALAN 3.0 Telephone and Line Analyzer represents advanced capability to detect and locate illicit tampering and security vulnerabilities on digital, analog, and VoIP telephone systems. New hardware provides the ability to test twisted pairs against modern telecommunication threats including shield and ground.

Efficiency: compares the results of multiple tests on multiple phone lines to quickly identify threatening anomalies

Usability: combines several countermeasure testing capabilities into a single piece of equipment (voltage, current, resistance, capacitance, non-linear junction detection, frequency domain reflectometry, and digital demodulation technology)

Portability: weighs only six pounds and data can be exported for further analysis and reporting


Combines multiple testing capabilities into a single piece of equipment
Automatic internal pair switching matrix performs tests on all pair combinations
Extensive, advanced VoIP traffic filtering makes it easier to locate and identify suspicious packet information
The patent-pending Fast Fourier Transform (FFT) algorithm converts network traffic into a spectrum view, creating visually identifiable patterns not easily noticed in a traditional packet list
Quickly performs common test functions including:
Multimeter tests (voltage, current, resistance, capacitance)
RF Broadband Detector (up to 8 GHz)
Spectrum Analyzer (up to 85 MHz)
High Gain Audio Amplifier
Bias Generator ±80 VDC
Audio Oscilloscope with active input (20 Hz to 20 KHz)
Digital demodulation available to confirm that the telephone line is not passing audio
Frequency Domain Reflectometer (FDR) to check for taps on the line
Non-Linear Junction Detector (NLJD) functionality to detect electronics connected to a line
Multi-test database system provides the ability to perform tests on all pair combinations, storing data for historical comparison and comparison against other lines


Technical Surveillance Countermeasures (TSCM)
Counter Surveillance
Wire Tap Detection
Telephone Line Testing
Phone Line Analysis
Eavesdropping Detection
Intelligence Protection
Executive Protection
Surveillance Equipment Detection
Electronic Surveillance Detection


• Primary computer: 32 bit RISC processor, 520 MHz
• Internal memory: 64 MB SDRAM (OS), 64 MB Flash
• External memory: Compact Flash Type III, USB mass storage


• Network: 10/100 Ethernet Controller for IP Packet Detection
• USB: USB Device (A Type) supports external keyboard, mouse, and USB mass storage device; USB Host (B type) for future use


• Headphone output: 3.5 mm mono connector
• Microphone input: 3.5 mm mono input


• Hard keys: 6 soft menu keys, 5 button quadrant navigation & other dedicated keys
• Encoder: high-resolution optical encoder
• Integrated touch screen with stylus
• Test inputs:
• Dual MOD8: supports 2, 4, 6, & 8 wire modular phone jacks with shield
• Banana type: standard sleeved sockets: ring, tip, and earth
• SMB RF input: RF/antenna connection to 8 GHz broadband detector
• Expansion port: supports communication & measurement for use with future accessories
• All inputs electrically isolated


• Spectrum Analyzer:
• Dual conversion, super-heterodyne receiver
• Frequency range: 30 kHz to 85 MHz
• Sweep time: 2 Seconds
• Step size: 1 kHz
• Bandwidth: 18 kHz
• Sensitivity: -100 dBm
• Broadband Detector:

• RF SMB input: to 8 GHz
• Line level test: 100 kHz to 600 MHz
• Sensitivity: -65 dBm


• Quick response auto-ranging: 500msec Sample Rate
• AC/DC Volts: 0 to 250V Maximum
• AC/DC Current: 0 to 300mA Maximum
• Resistance: 0 to 42MΩ
• Capacitance: 50pF to 40µF


• Optically isolated, direct digital control: high voltage DAC
• Output ceiling: ± 80 V
• Output ceiling (shield): ±65VDC, ±33VAC
• Modulation: fixed voltage, or variable rate Sine wave (10 Hz - 300 Hz)


• Audio bandwidth: 20 Hz - 20 KHz
• Gain: Up to 80 dB total system gain (voice band)
• AGC: digitally controlled automatic gain
• Filter: analog voice band filter (300 Hz to 3 kHz)


• External input: 15 VDC @ 3A
• Universal power supply: 100-240 VAC, 50-60 Hz
• Removable battery: Rechargeable Lithium ion, 4-hour runtime (typical)


• Dimensions: 10 in x 12.9 in x 2.7 in (25.4 cm x 32.8 cm x 6.9 cm)
• Unit weight with battery: 6 lbs (2.7 kg)
• Case dimensions: 19.5 in x 14.9 in x 5.4 in (49.5 cm x 37.8 cm x 13.7 cm)
• Case weight including unit and accessories: 19 lbs (7.1 kg)


• Operating temperature: 0°C to +50°C


• Operational Frequency: 225 kHz & 450 kHz
• Antenna Type: Balanced Loopstick
• Headphone Audio Output: 16Ω, 105dB SPL limited
• Battery: 9V Alkaline
• Runtime: 10 hours average, 22 hours (headphones)
• Size: 17.5 in x 1.5 in (44.45 cm x 3.8 cm) stored; 63.75 in x 1.5 in (162 cm x 3.8 cm) fully extended
• Weight: 1 lbs (.5 kg)
You may also be interested in the following products
4397 ˆ
Ñoncise description
4999 $
34301 ˆ
Ñoncise description
39000 $
25506 ˆ
Ñoncise description
29000 $
5717 ˆ
Ñoncise description
6500 $

Product added to the basket.
Make a purchase
Order Product
Product name